برترین مطلب این هفته ی انجمن

.:: خريد اشتراک یکساله کل انجمن ::.


نرم افزار تعميرگاه و فروشگاه موبايل اسکناس   نرم افزار تعمیرگاه مبین سافت   جهت اطلاع از شرایط تبلیغات کلیک کنید

صفحه 7 از 7 نخستنخست ... 34567
نمایش نتایج: از شماره 61 تا 67 , از مجموع 67

موضوع: جدیدترین اخبار و آپدیت های باکس سایکلون (Cyclone)

  1. Administrator آواتار ها
    Administrator
    مدیریت کل سایت
    Nov 2009
    IRAN
    37
    5,655
    20,346
    از کاربر 30,852 بار تشکر شده در 5,186 پست

    جدیدترین اخبار و آپدیت های باکس سایکلون (Cyclone)

    ***آپدیتهای باکس سایکلون (Cyclone) در این تاپیک***

    Hello, New Cyclone Box Installer is READY.



    What's new?



    =====================


    Installer v1.05


    23.04.2010


    =====================


    - Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones - E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.


    - Added support for BB5 FBUS New Protocol APE Loaders


    - Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.


    - Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)


    - Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)


    - Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)


    - Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)


    - Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"


    - Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !


    - Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:



    GR0103D101260C206C02


    GR0103D101260C213402


    GR0103D10126095A1F05


    GR0103D10126095A1F07


    GR0103D10126095A1F87


    GR0103D1012601022C00


    GR0103D1012601022E05


    GR09733814140C206C02


    GR0973381414095A1F05


    GR0973381414095A1F07


    GR0973381414095A1F87


    GR097338141401022C00


    ISL2TI020000093E2F30


    NI00IIIIRR030C20C607


    NI00IIIIRR03095B1F00


    NI00IIIIRR03095B1F01


    NI00IIIIRR030102F200


    NI00IIIIRR030102F201


    NI00IIIIRR030102F202


    NI00IIIIRR030102F203


    NI00IIIIRR0301035420


    NIMMIIIIRRFF0A021001


    NIMMIIIIRRFF094B2F01


    NIMMIIIIRRFF06150018


    NIMMIIIIRRFF06150110


    ST090404003C06150018


    ST090404004C06150018



    - Added TX2 warning when certificate is being not accepted (common problem while writing RPL)


    - Updated Nokia USB Connectivity Drivers to 7.1.22.0


    - Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)


    - Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files


    - Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up


    - Factory defaults after flash are now defaultly ticket (BB5,DCT4)


    - Mode transition manager added in firmware v01.37


    - Software accept Mode Transision to "Normal" when phone goes to "Power Off"


    - Flash Variants are displayed now in descending order


    - SL Array readen now upon RPL Backup is Keyb/FBUS Count masked


    - Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)


    - Fixed NCK Calculation for some mobiles (Security Section Checksum Error)


    - When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database


    - Fixed smartcard not responding for reset in some configurations


    - Fixed "Failed to Read SP Info" on older RAPv2 phones


    - Path manager - bug "/" fixed


    - Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)


    - SX4 Bypass is removed now (no need anymore)


    - Improved sending CMT Secondary Loader


    - Fixed TX2 test crash when phone is completly erased (TOC erased)


    - Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database


    - Improved Security Analysis, added HWC/CCC/Variant Certs Check


    - Box Firmware : 01.0C, Access Violation Fixed


    - Runtime Error when "Disable Skins" enabled fixed


    - Taksbar problems fixed


    - Fixed 1208 UEM Read/IMEI Rebuild


    - N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)


    - New Nokia Firmware introduced, improved stability a lot


    - DCT4Plus relock fixed


    - Mode transition improved


    - BB5 USB Flashing fixed


    - Factory Set problems fixed


    - Fixed problems when dealing with RAP3v2 Phones


    - Skin manager upgraded to v6.63


    - HW Platform is now being readen upon Box Initialization


    - Added support for CTF'2010 Platform


    - Flashbus writing speed increased about 10%


    - Flashbus FUR messages reading speed increased about 40%


    - BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..


    - After flashing, added average writing speed display


    - BootAgent removed, now Bootloader upgrade is managed by middle-loader


    - Main Firmware rewritten from scratch, old bugs gone away.


    - MPU Added


    - Improved Oscillator startup time, box hangup fixed in some cases


    - Realtime clock not used anymore, too much hardware problems when box not started


    - Fixed booting dead BB5 mobiles


    - If bb5 booting fails, SW displays possible reason reported by new firmware


    - BB5 is being try to boot now without hardware VCC switch


    - Added USB Dualport transactions (increases speed)


    - Added old protocols support (tick "Use Old Protocols Loader")


    - Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)


    - BB5 flash_block_Data checksum fixed


    - Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)


    - Fixed boot when after activating DCT4 FTD phone comes to dead


    - Fixed "Failed to decode MSID" when flashing some PPM DCT4 files


    - UPP ID is now represented as hex upon Read Info


    - Added detection whether Pri/Sec camera exists or is configurable


    - Minor changes and bugfixes


    - Black Skin introduced


    - Fixed DCT4 Unlock not being executed after Flashing Procedure


    - Versions snap


    Installer v1.05


    Main x86 Application v1.0.0.9392


    x86 Memory Manager v4.92


    Native USB Drivers v1.0.0.4


    USB-COM Stack Drivers v1.0.0.0


    Onboard Secure Bootloader v2.10


    Onboard Main Nokia Application v01.37


    Onboard COM Emulation Code v1.00


    Onboard Security Card Revision v1.09


    Nokia Connectivity Cable Drivers v7.1.22.0


    BB5 USB/FPIF Single Line/FPIF DualLine v20100410


    DCT4 FPIF Single Line/USB v20100410


    DCT4 Unlock Patches DEPRECATED


    Communication Stack SSLv3-keys-06092008


    Skin Stack v6.63


    لینک دانلود


    [فقط کاربران عضو قادر به مشاهده لینک ها می باشند. برای ثبت نام کلیک کنید...]
    ویرایش توسط Administrator : 04-23-2010 در ساعت 02:59 PM


    #1 ارسال شده در تاريخ 04-22-2010 در ساعت 09:47 PM

  2. کاربران زیر 5 تشکر کرده اند از Administrator برای پست مفید ایشان:

    !HONEY! (03-10-2011), AMIR.GHOLAMI (05-20-2011), hamrahangsm (05-23-2010), rain_saeid (03-07-2011), rezamoj (12-25-2010)

  3. SAM 1360 آواتار ها
    SAM 1360
    کاربر نیمه حرفه ای
    Feb 2012
    594
    305
    از کاربر 1,043 بار تشکر شده در 384 پست
    Cyclone Box Installer v1.21 Released 01


    Hi to all, new Installer for Cyclone Box is ready to download.

    What's new?

    =====================
    Installer v1.21
    25.06.2012

    =====================

    - New BB5 FBUs/USB Loaders v12.08.00 Added
    - Qualcomm Based Products support added (Lumia 800, 610, etc)
    - Normal mode Flashing is supported
    - Dead-mode flashing is supported
    - Downgrade is supported
    - Support for Multi-CNT Qulacomm Configurations
    - Support secure-erase USER Area - this takes about 15-25 minutes
    - Basic read info including battery information etc for Lumia products
    - Automatic Variant selection for Lumia products
    - Cross-flash is supported, if Public Key hash matches
    - After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\Cyclone Box\Drivers\ZuneDrivers
    - Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program Files\Cyclone Box\Drivers\LumiaFlashing
    - Abort Button improved
    - SX4 Default Database updated, added 30 new models
    - Nokia Connectivity cables drivers updated to v7.1.78.0
    - Minor changes and bugfixes


    Small tests:
    800 FF



    610 FF


    Where from download?
    ALWAYS FRESH installer you can get at: [فقط کاربران عضو قادر به مشاهده لینک ها می باشند. برای ثبت نام کلیک کنید...]
    Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
    You don't need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.

    Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
    However, ZUNE drivers (when you are attaching phone in Normal mode) need's to be installed Manually from C:\Program files\Cyclonebox\Drivers\ZuneDrivers. This you need to ONLY ONCE.

    Firmware upgrade is not needed.

    Join us on ********:
    [فقط کاربران عضو قادر به مشاهده لینک ها می باشند. برای ثبت نام کلیک کنید...]

    Stay tuned,
    Cyclone Team

    download mirrors:
    [فقط کاربران عضو قادر به مشاهده لینک ها می باشند. برای ثبت نام کلیک کنید...]
    [فقط کاربران عضو قادر به مشاهده لینک ها می باشند. برای ثبت نام کلیک کنید...]
    #61 ارسال شده در تاريخ 06-26-2012 در ساعت 11:21 AM

  4. SAM 1360 آواتار ها
    SAM 1360
    کاربر نیمه حرفه ای
    Feb 2012
    594
    305
    از کاربر 1,043 بار تشکر شده در 384 پست
    Cyclone v1.0.1.684 Released, One-click FREE Simlock CS Repair for XGold213 Added!!
    Hi to all,

    Cyclone v1.0.1.684
    - Added FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
    - Memory fragmentation issues fixed during Lumia Flashing
    - Cursor problems fixed
    - XP Usb support partially fixed
    - Minor changes and bugfixes

    Just run Cyclone, and autoupdate will fetch new version automatically.

    Join us on ********: [فقط کاربران عضو قادر به مشاهده لینک ها می باشند. برای ثبت نام کلیک کنید...]

    Best Regards,
    Cyclone Box Team coolcoolcool
    #62 ارسال شده در تاريخ 06-27-2012 در ساعت 07:37 PM

  5. SAM 1360 آواتار ها
    SAM 1360
    کاربر نیمه حرفه ای
    Feb 2012
    594
    305
    از کاربر 1,043 بار تشکر شده در 384 پست
    Cyclone v1.0.1.713 Released Cyclone v1.0.1.713 Released Hi, New update for Cyclone Box is ready. What's new ? - USB Booting problem solved - Improved XGold2 Security Repair - Improved RAPUv1, RAPUv2 USB Booting - Minor changes and bugfixes Update will be fetched automatically. BR, Cyclone Team
    #63 ارسال شده در تاريخ 06-29-2012 در ساعت 01:51 PM

  6. *ALIREZA* آواتار ها
    *ALIREZA*
    مدیران بازنشسته
    Apr 2010
    نصف جهان
    3,916
    7,492
    از کاربر 11,269 بار تشکر شده در 2,959 پست
    Worlds First Nokia Asha-311(RM-714) Fullflashed by CycloneBox!!!
    201200813Worlds First Nokia Asha 31128RM 71429 Fullflashed by CycloneBox 630


    #64 ارسال شده در تاريخ 08-13-2012 در ساعت 06:03 PM

  7. *ALIREZA* آواتار ها
    *ALIREZA*
    مدیران بازنشسته
    Apr 2010
    نصف جهان
    3,916
    7,492
    از کاربر 11,269 بار تشکر شده در 2,959 پست
    Cyclone Box Firmware v02.05 Released
    Hi, firmware v02.05 for Cyclone Box is Released.

    New MEPs added:

    MEP-12599-004
    MEP-12907-003
    MEP-17568-004
    MEP-24660-002
    MEP-26490-001
    MEP-26900-001
    MEP-27501-002
    MEP-27559-001
    MEP-27561-001
    MEP-29080-001
    MEP-40488-001
    MEP-46976-001

    Stay tuned.... biggrin

    Best Regards,
    Cyclone Box Team

    #65 ارسال شده در تاريخ 08-23-2012 در ساعت 11:22 AM

  8. کاربران زیر 2 تشکر کرده اند از *ALIREZA* برای پست مفید ایشان:

    Administrator (08-23-2012), MOOSAVI_GSM (08-26-2012)

  9. SAM 1360 آواتار ها
    SAM 1360
    کاربر نیمه حرفه ای
    Feb 2012
    594
    305
    از کاربر 1,043 بار تشکر شده در 384 پست
    [28-08-2012] CycloneBox iphone imei check service restored
    iPhone IMEI check service is restored now.
    • Service is not free anymore.
    • Single check costs you 1 Cyclone Credit.
    • Once you've checked your phone, data is cached on server and you can check it again for free.

    Example output:



    Please Wait...
    Cyclone Server (2.0.0.50), Cyclone Box Team 2008-2012 - Ready.


    stdClass Object
    (
    [imei] => 013128003164***
    [status] => Delivered
    [carrier] => AT&T USA
    [locked] => Yes
    [created] => 1346098925
    [delivered] => 1346098982
    [details] => stdClass Object
    (
    [errorCode] =>
    [serialNumber] => QR213MTGA4S
    [productVersion] => 5.1
    [countryCode] => US
    [partDescription] => IPHONE 4 16GB BLACK
    [appliedActivationPolicyID] => 52
    [assetTag] =>
    [futureDataA] =>
    [futureDataB] =>
    [ban] =>
    [carrierCode] => AT&T USA
    [contractStartDate] =>
    [contractEndDate] =>
    [deviceFamily] => iPhone
    [firstUnbrickDate] => 1.334624276E+12
    [initialActivationPolicyID] => 52
    [lastRestoreDate] =>
    [lastUnbrickDate] => 1.334625193E+12
    [macAddress] => 6CC26B9B4E58
    [nextTetherPolicyID] => 52
    [unbricked] => 1
    [unlockDate] =>
    [unlocked] =>
    [imeiNumber] => 013128003164559
    [ctn] => 18329225876
    [iccID] => 89014104243590399073
    [formattedContractStartDate] =>
    [formattedcontractEndDate] =>
    [formattedFirstUnbrickDate] => 17/04/12
    [formattedLastUnbrickDate] => 17/04/12
    [formattedLastRestoreDate] =>
    [formattedUnlockDate] =>
    [initialActivationPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
    [bluetoothMacAddress] => 6CC26B9B4E57
    [nextTetherPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
    [appliedActivationDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy

    br
    Cyclone Team
    #66 ارسال شده در تاريخ 08-28-2012 در ساعت 08:12 PM

  10. rezammm آواتار ها
    rezammm
    مشترکین طلایی
    Aug 2010
    1,034
    937
    از کاربر 1,185 بار تشکر شده در 569 پست
    Cyclone NO TP - USB ONLY Rooting for Lumia 800, 800C Released ;)

    rolleyes Hi everyone rolleyes

    - Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-801 LUMIA 800
    - Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-802 LUMIA 800C


    All NOKIA DLOAD OSBL loaders are supported (even latest one!)

    Instructions:
    1. Run Cyclone, it will be auto-updated
    2. Update your Box Firmware to v2.20
    3. Go to WP7 -> Simlocks Tab
    4. Select Product and click ROOT!

    It should go this way:

    Quote:
    Lumia No TP Root Procedure Started...

    If phone is alive, It will be automatically swithced to OSBL mode.
    If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

    1. Turn OFF device, wait 15 seconds afterwards
    2. Eject USB cable, wait 10 seconds
    3. Press and hold Volume-UP button
    4. Insert USB Cable. OSBL should be booted.

    Booting CMT...
    [Urządzenie kompozytowe USB]: WinUSB Port opened OK!
    [Urządzenie kompozytowe USB]: WinUSB Port opened OK!
    [Nokia USB Connectivity]: WinUSB Port opened OK!
    Switching to RAW Mode...
    [Nokia USB Connectivity]: WinUSB Port opened OK!
    [Nokia USB Connectivity]: WinUSB Port opened OK!
    OSBL Details
    Protocol: v1.1
    Version: v257.6
    Build: 12
    Timestamp: 2012-02-17 14:40:05
    OSBL Bootloader Ready
    USB&UART Tracing set
    RSA Signature Calculated for QCB Boot, Writing...
    OSBL Certificate Details
    Magic: WP70
    Version: 0
    Signer Server ID: 0x98031573
    Signer Timestamp: 2011-09-28 15:52:12
    Signer S/N: 23
    Signer User ID: 10046114
    Auth Level: Care
    Data Encryption: 0
    Image Index: 0
    Asic Index: 0
    Type: Image Write
    Hashtable Parsed OK
    Certificate Accepted
    [ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
    Write taken 0.358s (Average speed: 19462,61kBits/s)
    Restoring Modem from BACKUP_RAMFS_IMAGE...
    Restore OK
    Restarting MCU...
    Rooting Finished!

    After rooting, Qualcomm Bootloader is installed. That means phone will be detected as Mass Storage Device, and you will have full access to eMMC.

    Because patching is not good solution, we will add some good news aswell in next days biggrin

    However, if you need simlock patching badly you can use some free tools around to patch AMSS (i.e. NSS).

    Release Notes:
    1. Supported products: Cyclone Box Classic, Cyclone Box Reloaded, Cyclone Key
    2. Firmware Required v2.20
    3. Need No TP Activation, is COMPLETLY FREE for all Cyclone Key users, for rest you need have 60 credits on your account and your box will be automatically activated (credits will not be withdrawn from box anyway, this is just threshold).
    4. We also have solution to completly root rest of lumias, including 610, 610nfc, 900, etc... however it will be released ONLY if this solution WILL NOT BE COPIED. If somebody copy solution - it will be kept private.
    5. No need new installer, however if you need one, always latest one is here:
    [فقط کاربران عضو قادر به مشاهده لینک ها می باشند. برای ثبت نام کلیک کنید...]

    Best Regards,
    Cyclone Team
    ویرایش توسط rezammm : 08-07-2013 در ساعت 02:29 AM
    #67 ارسال شده در تاريخ 08-07-2013 در ساعت 02:25 AM

  11. کاربران زیر 2 تشکر کرده اند از rezammm برای پست مفید ایشان:

    Administrator (08-07-2013), علی فرهمندی (08-07-2013)

صفحه 7 از 7 نخستنخست ... 34567

موضوعات مشابه

  1. بازگشت طوفانیNaviFirm در Cyclone
    توسط *ALIREZA* در انجمن Cyclone Box
    پاسخ ها: 4
    آخرين نوشته: 07-13-2013, 04:38 PM
  2. atf یا cyclone?
    توسط azimraeesi در انجمن نوکیا
    پاسخ ها: 9
    آخرين نوشته: 04-13-2011, 10:44 PM
  3. خبری داغ این بار از cyclone box
    توسط Morteza Safakaram در انجمن Cyclone Box
    پاسخ ها: 1
    آخرين نوشته: 08-03-2010, 12:12 PM
  4. Cyclone آنلاکر گوشی های DCT4 RSA را منتشر کرد !!!
    توسط dr.diako در انجمن Cyclone Box
    پاسخ ها: 1
    آخرين نوشته: 04-17-2010, 01:02 AM
  5. كمك در اموزش cyclone box
    توسط GSM MINDS در انجمن Cyclone Box
    پاسخ ها: 3
    آخرين نوشته: 01-19-2010, 01:57 PM

کلمات کلیدی این موضوع

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست کنید.
  • شما نمیتوانید پست های خود را ویرایش کنید
  •  

Copyright ©2009-2021

To MihanGsm